Palms Remote Radio Juuko HV-K 1000 On/Off Transmitter

• 
  Neumaschine
• Type: Remote Radio Juuko HV-K 1000 On/Off Transmitter
• Baujahr: 2024

Preis: auf Anfrage

Beschreibung

Juuko JK1000 Transmitter features an ergonomic design that ensures a comfortable grip. Positioned at the top, it includes two high-brightness red LEDs that display the battery status and any error code anomalies. Additionally, there are two orange LEDs that signal when auxiliary functions are activated, like the selection between single and double hoist operations. A green LED also indicates when the remote control is active. If you have lost your transmitter or it has stopped working, you can order a new one that will be programmed to work with your receiver on a plug-and-play basis. For this, we need to receive the ID and CH code from the top label on your receiver. We provide technical support and are readily available via email, whatsup and telephone. Feel free to contact us at - or - for any inquiries or assistance. -------------------------------------------------------------------------------------------------------------------------------------------------------------- Push-buttons Configuration: 1 START push-button; 1 EMO (STOP) mushroom; 4 push-buttons SINGLE STEP Number of Available ON/OFF Command: Max. 10 + Start & EMO Command Response Time: ~ 50 ms Frequency Band: 433.0525 > 434.7900 Mhz Channel Space: 12.5 kHz Safety Performance of the STOP function (EN ISO 13849-1): Pl d Radio Communication: Bi-directional continuous transmission Antenna Impedance: 50 Ohm Maximum Operating Distance: 100 Meters (free field) Hamming Distance: ≥ 15 Power Supply: LR6(AA) 1.5V / NiMH(AA) 1.2V x 2 Dimensions: 193 x 57 x 51 mm Weight: 325g Degree Protection: IP65 Housing Material: PA6 (GF30%) Operating and Storage Temperature: (-25°C)~(+55°C) / (-40°C)~(+85°C); (-13°F)~(+131°F) / (-40°F)~(+185°C) -------------------------------------------------------------------------------------------------------------------------------------------------------------- The kit works with a lot of application. For sure please contact with us. If you have lost your transmitter or it has stopped working, you can order a new one that will be programmed to work with your receiver on a plug-and-play basis. For this, we need to receive the ID and CH code from the top label on your receiver.

Kontaktdaten:

Perfekt-Trans Kamil Rutkowski
Kwietniki 14B
59-411 - Paszowice
Tel.: +48 785 845 992
Mobil: +49 162 4861903
http://www.hydraulic-master.de/